Saitreg Fuel Nozzles Fuel Nozzles and Pumps

Fuel Injection Hose Clamp

Fuel Injection Hose Clamp

While on an off road trip, Jenny's Jeep began to experience the symptoms of a bad fuel pump. Her jeep would stumble and die at idle. It would only run if the rpms were kept over 1500 and it was low on power. It was also surging as the fuel pump lost pressure. It was making only 20 psi or so and that was simply not enough to keep the fuel from boiling in the hot fuel rail. It was a struggle, but we got her Jeep out of the woods under its own power and got it back to my shop.

Fist, we used the failing fuel pump to pump the remainder of the fuel from the tank. I used my fuel pressure tester attached to the fuel rail test port to pump the fuel into a can. I made a jumper wire and attached it to the fuel pump relay socket to force the pump to run.

Once the tank was empty, I disconnected the lines from the fuel pump assembly and disconnected the wires. I also disconnected the tank vent lines.

Next, I rigged up a lift to support the tank as I lowered it from the Jeep. I then loosened the tank support straps. After lowering the tank a couple of inches I was able to reach above the tank and loosen the filler and vent lines from the tank. I then removed the tank support straps and lowered the tank out of the Jeep.

With the tank out, I stood it up and cleaned the mounting flange for the pump assembly with a wire brush. I used a hammer and screwdriver to move the clamp ring off the pump. Then I carefully removed the pump from the tank taking care not to get dirt in the tank. The filter sock fell off and had to be retrieved with a gripper tool. Often the tapered grommet for the pump assembly will stay in the tank as well. If so, this has to be fished out. This one came out with the pump this time however.

To test the pump, Jenny made up a container for fuel and reconnected the pump to the lines and wires. The last time I worked on this Jeep there was a leak in the line between the pump and the tank outlet. This time however, there was no leak; the pump simply was not making pressure. Cold it would make only 30 psi not the required 48 psi. When the pump got hot it made less pressure. We measured 20 psi when the Jeep was trying to get home the day before.

We then tested the used replacement we had available. It easily made more than enough pressure. And still no leaks. The mounting bracket in this tank has been modified slightly in an off roading mishap so I had to adapt the new pump to fit. After some mixing and matching of parts and some creative routing of the expensive high pressure hose, I got it to fit. Jenny also had to put a wrap or two of Teflon tape on the pump inlet to get the filter sock to stay in place.

I carefully cleaned the pump mounting surface and the O ring. I then set the pump in place and tapped the retaining ring back into position.

We then lifted the tank up into the Jeep. With the tank almost in place I reattached the filler and vent lines. This was the most difficult part of the job by far. Once the lines were reattached, I lifted the tank the rest of the way back up and reinstalled the straps. I actually forgot to tighten the fuel line clamps before driving it. I should have tightened them right after I reinstalled the lines and attached the wires.

We put the fuel back in and ran the pump on the jumper a moment to prime the system and get air out of the lines. When I heard the regulator squeal, I knew the air was being purged. Jenny's Jeep started right up. It stumbled a moment while the computer adapted to having the right pressure at the injectors again but it settled down quickly.

A quick test drive showed it all worked fine. With the exception of the loose clamps on the fuel lines I mentioned earlier. I had to tighten them in the street because I was afraid they might pop off if we drove it back to the shop. Her fuel pressure is back in spec again. Hopefully this pump will last a while. The whole job took about four hours start to finish.

Mike Strawbridge is a Performance Improvement Coach who loves helping people achieve what they truly want in life and business. To learn more Jeep Repair tips and tricks see ==> http://mikestrawbridge.com/blog

Vacuum/Fuel Hose Clamp $8.99 Bikemaster Vacuum/Fuel Hose Clamp To find a vacuum leak, you need to eliminate the hoses one by one Clamp off each hose on one end then the other and quickly find the issue Attach clamp over the hose, clamp and slide the lock in place Manufacturer's lifetime warranty

Goodyear? 18'' Fuel Injection Hose $8.99 Fuel Injection Hose 18", SAE 30R9; 275?F Operating Temp. Designed for the extremely high temperatures generated by today's fuel injected engines. Temperature range of -29 to +275 Degrees F (302 degrees F intermittent) with a burst pressure rating of 900 psi. This special hose handles leaded, unleaded, alcohol-added, diesel and extended gasoline's, resisting sour gas oxidation.   Part # Size GDY65148 1/4" X 18" GDY65149 5/16" X 18" GDY65150 3/8" X 18"

1991-2003 BMW 525i Fuel Hose Clamp OEQ BMW Fuel Hose Clamp W0133-1642801 $1.95 . auto parts warehouse has extensive oeq fuel hose clamp catalogs.we are now offering free shipping on all oeq fuel hose clamp orders over $50.00. our secure oeq fuel hose clamp catalog is available every hour of everyday. shop with confidence for all your oeq fuel hose clamp needs. oeq fuel hose clamp are in stock and available today. save upto 60% off dealer price on your next oeq fuel hose clamp purchase. our online catalog contains a wide selection of the oem and aftermarket parts you need at unbeatable prices

1968-1978 Mercedes Benz 230 Fuel Hose Clamp OEQ Mercedes Benz Fuel Hose Clamp W0133-1644141 $9.7 13mm. auto parts warehouse has extensive oeq fuel hose clamp catalogs.we are now offering free shipping on all oeq fuel hose clamp orders over $50.00. our secure oeq fuel hose clamp catalog is available every hour of everyday. shop with confidence for all your oeq fuel hose clamp needs. oeq fuel hose clamp are in stock and available today. save upto 60% off dealer price on your next oeq fuel hose clamp purchase. our online catalog contains a wide selection of the oem and aftermarket parts you need at unbeatable prices

2004-2005 Mazda 3 Fuel Hose Clamp OES Genuine Mazda Fuel Hose Clamp W0133-1922562 04 05 $2.95 . Auto Parts Warehouse has extensive OES Genuine Fuel Hose Clamp catalogs.We are now offering FREE shipping on all OES Genuine Fuel Hose Clamp orders over $50.00. Our secure oes genuine fuel hose clamp catalog is available every hour of everyday. Shop with confidence for all your oes genuine fuel hose clamp needs. OES Genuine Fuel Hose Clamp are In Stock and available today. Save up to 60% off dealer price on your next OES Genuine Fuel Hose Clamp purchase. Our online catalog contains a wide selection of the OEM and aftermarket parts you need at unbeatable prices

2004-2005 Mazda 3 Fuel Hose Clamp OES Genuine Mazda Fuel Hose Clamp W0133-1922573 04 05 $2.95 . Auto Parts Warehouse has extensive OES Genuine Fuel Hose Clamp catalogs.We are now offering FREE shipping on all OES Genuine Fuel Hose Clamp orders over $50.00. Our secure oes genuine fuel hose clamp catalog is available every hour of everyday. Shop with confidence for all your oes genuine fuel hose clamp needs. OES Genuine Fuel Hose Clamp are In Stock and available today. Save up to 60% off dealer price on your next OES Genuine Fuel Hose Clamp purchase. Our online catalog contains a wide selection of the OEM and aftermarket parts you need at unbeatable prices

Tool Aid TA19780 Hose Clamp Pinching Pliers Set $29.87 Use to clamp fuel injection brake vacuum and cooling systems hoses. Includes one each small medium and large Hose Clamp Pliers in high visibility yellow. Smooth rounded jaws prevent hose damage. Lightweight and nonmetallic. Locks

Goodyear? 10 Ft. Fuel Injection Hose $39.95 ?" x 10' Fuel Injection Hose, SAE 30R9; 275?F Operating Temp. Designed for the extremely high temperatures generated by today's fuel injected engines. Temperature range of -29 to +275 Degrees F (302 degrees F intermittent) with a burst pressure rating of 900 psi. This special hose handles leaded, unleaded, alcohol-added, diesel and extended gasoline's, resisting sour gas oxidation.

Goodyear? 25 Ft. Fuel Injection Hose $85.95 25' Fuel Injection Hose, SAE 30R9; 275?F Operating Temp. Designed for the extremely high temperatures generated by today's fuel injected engines. Temperature range of -29 to +275 Degrees F (302 degrees F intermittent) with a burst pressure rating of 900 psi. This special hose handles leaded, unleaded, alcohol-added, diesel and extended gasoline's, resisting sour gas oxidation.   Part # SIZE GDY65151 1/4" X 25' GDY65152 5/16" X 25' GDY65153 3/8" X 25'

CTA GM Fuel Injection Tester $35.95 Test vehicles with Multi-port fuel injection Features 3-1/2? (90mm) gauge with dual calibration (5-145 PSI / 25-1,000 kPa) and hose with quick disconnect

CTA Chrysler Fuel Injection Tester $57.95 Test vehicles with TBI and Multi-port fuel injection Features 3-1/2? (90mm) gauge with dual calibration (5-145 PSI / 25-1,000 kPa) and 3 hose assemblies

CTA Ford Fuel Injection Tester $65.95 Test vehicles with TBI and Multi-port fuel injection Features 3-1/2? (90mm) gauge with dual calibration (5-145 PSI / 25-1,000 kPa) and 3 hose assemblies

Fuel Injection Pressure Tester by Equus $44.95 The Fuel Injection Pressure Tester by Equus has a large, easy to read 2-1/2 inch dial face with 0-100 psi scale. It has a durable 16 inch gauge hose and 6-foot bleed-off hose with solid brass fittings. Includes Ford, GM, and Chrysler test adapters along with a Tee adapter for import vehicles. Accurately Tests: Fuel Pump pressure, Fuel Pressure regulator, leaking injectors, and clogged fuel filters. Includes instructions in English, French, and Spanish.

OTC Fuel Injection Canister Type Cleaner. Each $152.98 Manufacturer: OTC. Each. Features Benefits: Fuel injection cleaner canister includes: gauge, hose, instructions, and Tools Techniques manual Customers also search for: Discount Fuel Injection Canister Type Cleaner, Buy Fuel Injection Canister Type Cle

Hose Clamp Set $22.99 BikeMaster Hose Clamp Set Protect chrome, paint, o-rings, and seals from engine fluid when removing hoses with BikeMaster's Hose Clamp Set. Sure we have all kinked hoses when removing them but that only slows the fluid from draining but there is always a rogue drop that hits something it shouldn't. Now you can remover hoses with surgical precision by using these hose clamps, they come in 3 different sizes so you can clamp any diameter oil, fuel, or radiator hoses. Smooth, rounded jaw edges prevent damage to internal hose reinforcement Quick and simple one hand use Made from durable glass-reinforced nylon Material properties include lightweight, non-conductive and hi-visibility color to prevent accidental loss of clamps Anti-slip crimper jaws Hose size ranges: Small crimper: 11mm-19mm Medium crimper: 22mm-42mm Large crimper: 22mm-60mm

Aluminum Hose Clamp Set $26.99 BikeMaster Aluminum Hose Clamp Set Protect chrome, paint, o-rings, and seals from engine fluid when removing hoses with BikeMaster's Hose Clamp Set. Sure...we have all kinked hoses when removing them but that only slows the fluid from draining but there is always a rogue drop that hits something it shouldn't. Now you can remover hoses with surgical precision by using these hose clamps, they come in 3 different sizes so you can clamp any diameter oil, fuel, or radiator hoses. Smooth, rounded jaw edges prevent damage to internal hose reinforcement Quick and simple one hand use Strong, lightweight aluminum construction Anti-slip crimper jaws Hose size ranges: Small crimper: 11mm-19mm Medium crimper: 22mm-42mm Large crimper: 22mm-60mm

Fuel Injection & Tachometer Adapter $166.99 Fuel Injection & Tachometer Adapter;

Lisle LIS55700 Master Fuel Injection Kit $549.3 Features and Benefits: Master fuel injection test set test all types of fuel injection systems Set comes in a plastic blowmolded case for protection and for easy use Tests GM Ford Chrysler Honda/Acura Toyota Bosch CIS and LJetronic Weight 10 lbs.This set checks fuel pressure on most port fuel injection (PFI) and throttle body injection (TBI) systems. Comes with a variety of adapters and gauges for checking many types of systems. Adapts to work with test port connections end of hose connections and inline connections. List of component parts included with instructions.

CTA Fuel Injection Cleaning Canister $192.95 Canister is filled with cleaning fluid and attached to gauge head and adapters to enter fuel system and injectors. Use with shop air.     Includes: 3-1/2? (90mm) gauge with dual calibration (5-145 PSI / 25-1,000 kPa) 5? (1.5m) hose assembly with 1/8? NPT hose end to adapt to different fittings

CTA Fuel Injection Cleaning Set $210.95 Use with either cleaning hose or canister with hose assemblies and fittings for cleaning of injectors on most gasoline engines.     Includes: Disconnect tools Hose clamps Tube nuts Application chart

TOOL AID 58000 Complete Fuel Injection Tester $388.64 The one kit for testing virtually all domestic and imported cars trucks and SUVs with gasoline fuel injection systems. For MultiPort Throttle Body (TBI) and continuous injection systems (CIS). Quick coupler fittings provide easy and fast hookups. Accurately and quickly diagnose fuel injection related problems. 4 foot hose provides more mobility while monitoring fuel injection pressure. Tests current and older models. Supplied with two dual range gauges: 0100 PSI (07 BAR) with hangup hook; 050 PSI (03.5 BAR) for accurate low pressure applications. Includes adapters hoses and clamps. Blow molded case with numbered positions for storage and easy identification of components. Bleedoff valve with 6 feet of translucent hose to safely depressurize system after completion of testing. Complete illustrated instruction manual included.

Fuel Injection $81.25 Fuel injection is a system for mixing fuel with air in an internal combustion engine. It has become the primary fuel delivery system used in gasoline automotive engines, having almost completely replaced carburetors in the late 1980s. A fuel injection system is designed and calibrated specifically for the type(s) of fuel it will handle. Most fuel injection systems are for gasoline or diesel applications. With the advent of electronic fuel injection (EFI), the diesel and gasoline hardware has become similar. EFIs programmable firmware has permitted common hardware to be used with different fuels. Carburetors were the predominant method used to meter fuel on gasoline engines before the widespread use of fuel injection. A variety of injection systems have existed since the earliest usage of the internal combustion engine. The primary difference between carburetors and fuel injection is that fuel injection atomizes the fuel by forcibly pumping it through a small nozzle under high pressure, while a carburetor relies on low pressure created by intake air rushing through it to add the fuel to the airstream. Author: Miller, Frederic P./ Vandome, Agnes F./ McBrewster, John Binding Type: Paperback Number of Pages: 120 Publication Date: 2010/08/02 Language: English Dimensions: 6.00 x 9.02 x 0.28 inches

CTA Bosch Fuel Injection Pressure Tester $123.95 Detects bad fuel pumps, bad pressure regulators, leaking injectors and clogged fuel filters.     Includes: 3-1/2? (90mm) gauge with dual calibration (5-145 PSI / 25-1,000 kPa) Hose assembly Brass adapters

SUR&R Positive Seal Hose Clamp Kit $68.95 Superior 360? sealing for high-to-low pressure applications including fuel, A/C, and coolant lines Includes 100 positive seal clamps with permanent, no leak seal Features durable seal clamp pliers with protective grip handle Consistent, uniform seals prevent damage to hose   Set Contents: 1/4" 360? Seal Clamp, 10/Pkg. 5/16" 360? Seal Clamp, 10/Pkg. 3/8" 360? Seal Clamp, 10/Pkg. 1/2" 360? Seal Clamp, 10/Pkg. 9/16" 360? Seal Clamp, 10/Pkg. 11/16" 360? Seal Clamp, 10/Pkg. 23/32" 360? Seal Clamp, 10/Pkg. 3/4" 360? Seal Clamp, 10/Pkg. 7/8" 360? Seal Clamp, 10/Pkg. 15/16" 360? Seal Clamp, 10/Pkg. 360? Seal Clamp Pliers

Master Fuel Injection Pressure Test Set $330.95 ? This set is a must have for the professional technician! ? The uniquely designed 3-1/2'' gauge has a special expanded 1lb. increment dual dial for accurate reading, with a 100 PSI/700 kPA scale. ? It also has a relief valve and 6 ft. of tubing to relieve the pressre and fuel safely. Also allows checking for sufficient fuel flow. ? Gauge has hook, allowing technician to have both hands free ? The included adapters, hoses and fittings cover all fuel injection systems and most cars and trucks world wide! ? A time saving quick coupler connection at the end of he gauge hose makes a speedy and efficient couple possible with most adapters. ? Set comes in a specially designed molded case to make storage easy and organized.By Star Products.

OTC Fuel Line Clamp Set. Each $12.65 Manufacturer: OTC. Each. Features and Benefits: Set of two pinchers Used to quickly shut off flow from vacuum, brake, and fuel lines Enables you to pinch and hold hose without damage Customers also search for: Discount OTC Fuel Line Clamp Set, Buy OTC F

Master Fuel Injection Pressure Test Kit With Quick Couplers $377.95 ? The one kit for testing virtually all domestic and imported cars, trucks and SUVs with gasoline fuel injection systems. ? For Multi-Port, Throttle Body (TBI) and continuous injection systems (CIS). ? Quck coupler fittings provide easy and fast hook-ups. ? Accurately and quickly diagnose fuel injection related problems. ? 4 foot hose provides more mobility while monitoring fuel injection pressure. ? Tests current and older models. ? Supplied with two dual range gauges: 0-100 PSI (0-7 BAR) with hang-up hook; 0-50 PSI (0-3.5 BAR) for accurate low pressure applications. ? Includes adapters, hoses, and clamps. ? Blow molded case with numbered positions for storage and easy identification of components. ? Bleed-off valve with 6 feet of translucent hose to safely depressurize system after completion of testing. ? Complete illustrated instruction manual included.By Tool Aid.

SG Tool Aid SGT38000 Comprehensive Fuel Injection Pressure Test Kit $484.06 Features and Benefits: Tests gasoline fuel injection pressure systems on virtually all domestic and imported cars and trucks For multiport throttle body and C.I.S. KJetronic Fuel Injection Systems Bleed off valve with 6 of translucent hose safely depressurizes system after completion of testing Includes two gages with dual ranges: 0100 PSI (07 BAR) and 050 PSI (03.5 BAR) All components connect together easily for fast hook upsThis complete master fuel injection pressure tester for cars and trucks is accurate and reliable and easy to use with a complete illustrated instructional manual. Kit includes: adapters for special applications assorted hoses hose barb fittings and hose clamps to test older vehicles. Comes in a 15 x 10 x 31/4 durable plastic storage case with carrying handle. Case is molded with numbered positions for all components to ensure proper operation and organization.

Star Products STATU550 Master Fuel Injection Kit $529.06 Features and Benefits: Covers most models 1988 through 2004. Includes five most popular banjo bolt test adapters: M14 x 1.50 M12 x 1.50 M12 x 1.25 M10 x 1.00 and M8 x 1.00. Banjo bolt test adapters and vehicles banjo bolts are the same size hex which enables the Technician to use the same wrench for component removal and installation. Contains M6 x 1.00 Honda test port adapter. Includes fuel pump deadhead pressure test adapter with 1/4 in. 5/16 in. and 3/8 in. hose sizes. The test gauge assembly disconnects from the test hose and valve assembly for easier storage and improved gauge protection. The redesigned 71317 fuel line tee can now accommodate 3/8 in. hose sizes in addition to the 1/4 in. and 5/16 in. previously accommodated hose sizes. Contains longer tee adapter cut test hoses for easier connections. Includes longer redesigned test hose adapters for Ford Toyota/Geo and Audi/VW. The longer test hoses allow adapters to tee into the fuel system with less distortion and movement of the fuel line by looping the test adapter. Contains popular 5/16 in. and 3/8 in. quick connect tube form adapters used on Chrysler GM and Toyota. Includes popular standard and small Schrader adapters in both short hose and right angle configurations. Unlike competing test kits our kit contains: 16mm Oring adapter and bolts used on popular Hyundia and Mitsubishi vehicles. 11mm Oring adapter and bolts used on popular Nissan and Infiniti vehicles. M12 x 1.00 Honda pulse damper adapter used on popular Accord Civic and S2000 models. Contains neoprene boot for improved protection of the test gauge and vehicle finish. Includes a seal repair parts kit four hose clamps and two pieces of 3/8 in. inverted flare tubes and two 5/8 18 tube nuts. Consists of neatly organized blowmolded case with marked adapters for easy cross reference to the adapter guide book. The case contains a hinged lid compartment to easily store hose assemblies.

Star Products STATU470B Fuel Injection Cleaner $297.03 Features and Benefits:. Check the vehicle fuel pressure with the right hand gauge and easily set cleaning pressure with the left hand gauge. Restores the original spray pattern more effectively giving improved performance fuel economy and emission tests. Cleans carbon from intake valves fuel passages and cylinders with a professional carbon cleaning solution. Includes check valve for added safety. Updated design in more user friendly. Set includes steel braided teflon hose that resists solvents 20 oz. capacity bottle and redesigned gauge boots for added protection.

Star Products STATU74489 Fuel Injection Update Kit $84.5 TU74489Fuel Injection Update KitFeatures and Benefits:U.S.A Made Use with any Star F.I. pressure test kit with a quick coupler Includes right angle adapters for Ford and GM Good for those hard to reach places Includes adapter to allow checking Deadhead Pressure on 1/4 5/16 3/8 hose Also Quick Connects for Chrysler and GM vehicles with metal and plastic disconnect valves

Tubing, Clic Clamp Hose Clamp For 2'' Tubing: A $1.66 This clamp is guaranteed to ensure a hose connection.

Bosch Fuel Injection Systems $13.97 A comprehensive handbook covering Bosch's intermittent and continuous fuel injection systems that begins with the basics of engine operation, then summarizes the evolution of gasoline fuel injection, from the earliest adaptation of diesel technology to a description of a lambda sensor.

Oil Hose Clamp $4.45 Oil Hose Clamp for 50cc 2-stroke 1DE41QMB engines.

Fuel Injection Wiring Harness $391.99 Fuel Injection Wiring Harness; ECM/PCM Service #s 1227730 Or 16198262; Controlled 200/700-R4 Transmission;