Saitreg Fuel Nozzles Fuel Nozzles and Pumps

Fuel Pressure Test Kit

Fuel Pressure Test Kit

How to build a spud gun with sureshot kit (SIK-20)

SIK-20 Standard Igniter Instructions

These instructions are intended to help you build an effective yet simple spud gun (potato gun).

1. These instructions/procedures are provided as-is.
No guarantee is made that this device will function as well or better as I have experienced, intend, or describe it to operate. In other words, your results may vary, and they may even be very undesirable results, possibly resulting in personal injury or property damage. Please review the site disclaimer for more information.

2. The wording and statements/nomenclature pertaining to the construction and operation of this potato launcher are intended as such to help ensure one attempting to do this has a basic understanding of the equipment and materials involved. If some of the statements seem 'Greek' to you or you do not recognize some symbols or phrases, that is wholly my intent, and you should obtain assistance from a trusted source or not proceed at all.

3. These instructions are intended for a beginner or someone that has never built a spudgun before. The procedure outlined below is not necessarily the method myself or another experienced spudgun builder uses. These instructions will help guide you in building a "sound" piece of launching hardware. As you gain experience, you may find that different things may work better for you.... but start simple. Thanks, and happy spudding!

Keep in mind that PVC pipe/fittings are not approved by the manufacturer to be used for the purpose of constructing spudguns.

Step 1: Getting stuff to build spud gun (potato gun)

This materials list is to build a very simple starter model potato launcher, with the intent to get the most bang from your buck (so to speak). By no means is this the only way to build a launcher, or nearly the coolest, but still able to provide hours of fun.  Also, make sure to obtain pressure rated parts for building your spud gun.  We do not recommend ABS or cellular core type pipe and fittings, these are not pressure rated and unsafe.

MATERIALS:

Obtain the following items:

1.                12" of 4" SCH40 PVC Pressure Rated water pipe (chamber body)

2.                48" of 2" SCH40 PVC Pressure Rated water pipe (barrel stock)

3.                4" PVC coupler

4.                4" x 2" PVC bushing (if not available combine two, like 4x3 and 3x2)

5.                4" PVC FPT adapter (clean-out adapter)

6.                4" PVC MPT threaded plug

7.                PVC primer, one with dye in it if possible (purple, blue)

8.                PVC pipe cement, medium body is best

The rest is provided with our SIK-201 kit.

EQUIPMENT/TOOLS:

Suggested tools for building the potato launcher:

1.       Hand wood saw (or hacksaw, for cutting pipe, maybe you already got it cut at the store)

2.       Wire stripper

3.       Terminal ring crimper (pliers can work)

4.       3/16” Allen wrench

5.       7/16 wrench

6.       Drill and ½” drill bit

7.       Medium half round file for shaping pipe (or a lathe if you got one)

8.       Rag for PVC cement clean up (disposable)

Step 2: Preparing the materials for assembly

To make sure everything goes together properly and smoothly, proper conditioning and sizing of the materials is necessary. Pay particular attention to the shaping of the pipe ends, as this is a major factor in proper solvent welding with the fittings.

PVC PIPE SIZING

Cut the two pipes to size, 4” dia cut 12 “length and 2” dia. Cut 48” length with the saw unless you already did so in the store. Using the file, take off the sharp corners on the inside AND outside of the pipe. Radiusing the inside helps reduce the amount of potato scud that can build up in the launcher, and breaking the outside corner ensures proper solvent welding, if this is not done leak paths may result. Cut ends should be as square as possible. To one end of the 1 1/2" pipe it is suggested that the inside be chamfered about 0.020" and the outside filed or turned down to almost meet the inner chamfer, creating a blunt knife to help size the potato.

PVC FITTINGS

Inspect the fitting for really bad weld lines or possible large dislocations that may result in premature failure. Remove all paper tags or labels by peeling, scraping, even using a bit of primer to clean off the last adhesive. File off any sharp spurs that may hamper your ability to grip the fittings firmly when assembling.

Step 3: Assembling the spud gun launcher

I Chamber Assembly:

Prime both ends of the 4" pipe, also priming the 4" bushing, both 4" coupler sockets, and 4" slip fit female adapter. DO NOT get any primer on the adapter threads! Immediately apply pipe cement to the three primed 4" fittings, then LIBERALLY to both ends of the 4" pipe. Start both the coupler and adapter fittings on the pipe, start the bushing in the coupler, then right the assembly with the threads up, pressing it together with body weight while twisting about 1/2 turn. Hold this position for at least 30 seconds. The pipe ends should bottom each about 1 1/2" inside the fitting socket. If they both do not bottom, either apply more force IMMEDIATELY somehow to get it to, or you are screwed and have to throw it out--start over with that. If the fittings and pipe are properly conditioned this should not be a problem. Wipe up any spilled glue with the rag, but leave a good bead at the external pipe/fittings line. If any glue got on the threads get it out of there as fast as possible! Any glue on your hands should just be left to dry and then peel it off. Using solvent to remove it will just increase your exposure to it.

II Barrel Assembly:

Prime one end of the barrel and the 2" socket on the bushing. If one end of the barrel was chamfered to a knife, prime the square 'regular' end of the pipe. Apply glue, liberally to the pipe, and press together, again using a 1/4 turn motion to bottom. Hold for 30+ seconds. After releasing place the unit upright for several minutes, to let the glue set a little more. Solvent welding is more of a curing than a drying process. Solvent is lost, hence the term drying, but the action of the solvent effectively cures all those individual plastic parts into one continuous physically joined piece of plastic. Properly done, solvent welds are always stronger than bulk pipe.

AT THIS POINT AND FOR SAFETY PLEASE WAIT AT LEAST 24 HOURS FOR THE GLUE TO FULLY CURE AND SOLVENT TO DISSIPATE.

If you are planning to paint your spud gun cannon, now is a good time

III installing the electrodes

The SIK-20 kit includes 2 electrode assemblies sized to be used where the coupling fits over the pipe.  The over lap of pipe and coupling is 2” and we recommend centering the electrodes within the overlap area, 180 degrees opposing.  Once you have the electrode centers marked you will need to drill ½” holes centered on the marks and exactly opposing each other.  At this point the tips should be touching.  (Once the terminals are attached and jam nuts tightened the well nuts will expand and electrode gap will increase… See section V)

IV Handle Assembly

Push the handle ends on the aluminum tube until its seats to the bottom.  Connect the modular interface from the MRS-201 ring set and the handle assembly using the 4 ¼-20 x 5/8” socket cap bolts.  Check the alignment on a flat surface.  Place the ring arches on the barrel near where the barrel and chamber meet. Attach with smooth top rings and (4) ¼-20 x 7/8” Socket cap screws and square nuts

TAKE TURNS TIGHTENING BOTH SIDES SO THE OPPOSING CLAMPS HAVE EQUAL SPACNG BETWEEN THEM.  PLEASE DO NOT OVERTIGHTEN.  OVER-TIGHTENING CAN FRACTURE THE PVC. TIGHTENING WITH THE SMALL SIDE OF THE ALLEN WRENCH WILL PROVIDE ADUEQATE TORQUE. 

V Igniter / lead / electrode connection

Insert the electrode assembly through previously drilled ½” holes.  Insert red button igniter through handle hole guiding the wires through and out the side facing the chamber.  Size wires, remove insulation, slide on heat shrink, crimp on terminals slide heat shrink to insulate terminal and wire connection.  Heat shrink tubing using a lighter or hair dryer.  Connect igniter terminals to threaded electrode assembly in this order: washer – terminal – nut and tighten.   The electrode assembly well nuts will expand in the hole and provide an airtight seal, tighten until ¼” threads are  above the nut.

CAUTION – BEFORE CHECKING ELECTRODE GAP MAKE SURE CHAMBER IS EMPTY OF GLUE/PRIMER VAPORS.  

With chamber open and from a distance, look to check for spark jumping electrode gap.  Your gap should be around 1/8” to 3/16” and produce a bright spark.  If the electrodes are too close pull them out and file/grind of tips slightly to widen the gap.  Once you have consistent spark its time to add the electrode covers (plastic cover with metal insert).  Align over the threaded electrode end and gently tap on.

Step 4: Using the launcher

1.    Now that you spark is verified, test fit the threaded plug into the adapter. It should engage the threads at LEAST TWO TURNS. If not, check for crud in the threads, and if clear, obtain a 60deg triangle diamond file, and size down the plug threads a little. The threads are at a 60deg angle, so careful filing.  Usually filing the first few threads is ok.

2.    With the cap off, load a potato! With the chamber on the ground, place a potato over the muzzle of the spud gun launcher, and press it down with your palm, shaving off the excess, creating a cylindrical potato plug. Make sure the potato contacts the wall firmly all around, or it will not fire or not that well. Loading the potato sideways is acceptable, as it creates a more stable projectile anyway. Ram the potato down to within 2" of the breech of the barrel, using a smaller diameter PVC pipe or broomstick. Don't push it too far or it will fall out into the chamber...and just be subject to a short baking cycle.

3.    With the spud firmly seated in the breech, pick up the launcher and holding with one hand, dispense 1-2 seconds of Static Guard™ (hairspray works too) directly into the chamber. Don't use too much; it will just make a mess. Quickly close by screwing on the end cap hand tight, do not use a tool to tighten to two turns or you will likely never get it off again.

4.    Call out "Fire in the hole!", point the launcher in a safe direction, and depress the igniter button. That potato you rammed down there should exit at a quite rapid rate with a sizable report, and depending on where you aimed and at what angle you pointed, it went anywhere from 6 inches to ~200 yards from the muzzle. Pretty cool. If you clicked the igniter a few times and it didn't work, you are not alone, check out my next section.

5.    If spud gun worked, great! Remove the end cap (this may require a tool), vent the spent gasses getting a fresh load of air, and repeat as necessary!

Trouble shooting your spud gun cannon

There are a lot of reasons why your spud gun launcher may not be working. First and foremost NEVER take off the cap and start clicking away at the igniter. This again has led to human fires and that chemical thermal hair removal thing again....

Hairspray in cold weather just does not go well. Too much of the burnable stuff in the spray condenses on the chamber walls, making it very difficult to burn. You might consider a lighter, hotter fuel (propane....)

To 'defuse' a misfire you need to take off the cap, while pointing it in a safe direction. Allow the chamber to air out for several minutes, perhaps longer, to get the fuel load out. After you are certain the fuel has been vented, again verify the spark, just by turning the chamber enough so you can see where the spark should be. Never point the chamber bore directly at your face, or body, or anybody else. If it sparks then it is a fuel mixture problem.

One of the most common fuel problems leading to misfire is too much fuel! Not usually a problem with hairspray, other richer fuels can be overloaded above their UEL value, and they won’t work. Always try less fuel rather than more fuel.

If you still can't get it to work I invite you to peruse the many other web sites that talk about how to troubleshoot your combustion launcher. Spudfiles.com is an excellent resource.

About the Author

Sureshot Inc. / www.ultimatespudgun.com

Deluxe Global Fuel Injection Pressure Test Kit $392.95 Comprehensive kit Tests ALL Fuel Injection Systems including: ? American Motors; Bosch AFC & CIS; GM; GM TBI; Chrysler; Japanese Fuel Injection; MPC European & Japanese Systems; Bendix Type/Schrader valve fuel injection including the small Scrader valve found on Ford products. ? Uniquely designed 3-1/2'' gauge with expanded 1 lb. increment dual dial for accurate, easy reading. ? 100 psi/700 kPa scale ? Pressure relief valve ? Made in the USABy Star Products.

Fuel Pressure Gauge Kit $77.99 Fuel Pressure Gauge Kit; w/Fuel Injection;

SG Tool Aid SGT38000 Comprehensive Fuel Injection Pressure Test Kit $484.06 Features and Benefits: Tests gasoline fuel injection pressure systems on virtually all domestic and imported cars and trucks For multiport throttle body and C.I.S. KJetronic Fuel Injection Systems Bleed off valve with 6 of translucent hose safely depressurizes system after completion of testing Includes two gages with dual ranges: 0100 PSI (07 BAR) and 050 PSI (03.5 BAR) All components connect together easily for fast hook upsThis complete master fuel injection pressure tester for cars and trucks is accurate and reliable and easy to use with a complete illustrated instructional manual. Kit includes: adapters for special applications assorted hoses hose barb fittings and hose clamps to test older vehicles. Comes in a 15 x 10 x 31/4 durable plastic storage case with carrying handle. Case is molded with numbered positions for all components to ensure proper operation and organization.

Fuel Cap Pressure Tester $209.95 An economical means of pressure testing fuel caps to aid in OBD II diagnosisand prescreen vehicles for emission test failures. The kit includes: ? FPT-26 Low Pressure Leak Tester is a rugged aluminum hand pump with 0-60 (in/H2O) analog gauge. ? The FPT25-4AS BAR-97 certified Fuel Cap Adapter tests all standard threaded caps on foreign and domestic vehicles. ? Blow-molded case for convenient storage. ? Limited lifetime warranty. By Waekon.

Master Fuel Injection Pressure Test Kit With Quick Couplers $377.95 ? The one kit for testing virtually all domestic and imported cars, trucks and SUVs with gasoline fuel injection systems. ? For Multi-Port, Throttle Body (TBI) and continuous injection systems (CIS). ? Quck coupler fittings provide easy and fast hook-ups. ? Accurately and quickly diagnose fuel injection related problems. ? 4 foot hose provides more mobility while monitoring fuel injection pressure. ? Tests current and older models. ? Supplied with two dual range gauges: 0-100 PSI (0-7 BAR) with hang-up hook; 0-50 PSI (0-3.5 BAR) for accurate low pressure applications. ? Includes adapters, hoses, and clamps. ? Blow molded case with numbered positions for storage and easy identification of components. ? Bleed-off valve with 6 feet of translucent hose to safely depressurize system after completion of testing. ? Complete illustrated instruction manual included.By Tool Aid.

Actron ACTCP7838 Professional Fuel Pressure Tester Kit $59.03 Measures the available fuel pressure with engine running on or off. Features 6ft hose to aid reaching any test point. Handy pouch for storing gauge and adapters. Features adaptors to fit most domestic and import applications. This fuel pressure tester diagnoses drivability problems caused by poor fuel pressure. It features a relief button and 6ft hose to safely dispose of gasoline without disconnecting the gauge. It also works on the throttle body injection with a threaded connection at fuel filter or throttle body.

Fuel Pressure Regulator Diaphragm Kit $61.99 Fuel Pressure Regulator Diaphragm Kit; Gasoline; 5-Port Return Style;

Fuel Pressure Isolator Kit $90.99 Fuel Pressure Isolator Kit; For Mechanical Gauges; 2 5/8 in.; 0-80 psi; Incl. Mounting Bracket/-4AN Fittings; Gauge Not Included;

Tool Aid TA 58000 Master Fuel Injection Pressure Test Kit with Quick Couplers $388.64 The one kit for testing virtually all domestic and imported cars trucks and SUVs with gasoline fuel injection systems. For MultiPort Throttle Body (TBI) and continuous injection systems (CIS). Quck coupler fittings provide easy and fast hookups. Accurately and quickly diagnose fuel injection related problems. 4 foot hose provides more mobility while monitoring fuel injection pressure. Tests current and older models. Supplied with two dual range gauges: 0100 PSI (07 BAR) with hangup hook; 050 PSI (03.5 BAR) for accurate low pressure applications. Includes adapters hoses and clamps. Blow molded case with numbered positions for storage and easy identification of components. Bleedoff valve with 6 feet of translucent hose to safely depressurize system after completion of testing. Complete illustrated instruction manual included.

BD Diesel Fuel Pressure Kit $179.99 Option for: BD Diesel X-Monitor;Sender for:Lift Pump Fuel Pressure

Actron ACTCP9920A Autoanalyzer And Professional Fuel Pressure Tester Kit $190.05 A comprehensive user manual with illustrated stepbystep automotive test procedures and examples in English Spanish and French. Designed to help detect a defective fuel pump is defective and can help diagnose fuelsystem related performance problems. Included auto analyzer performs all standard electrical tests for oncar and bench troubleshooting. Fuel pressure tester is compatible with most makes and models. Blow molded case with convenient storage solution for User manual and vehicle data tables. Actron Fuel Pump Diagnostic Kit with Auto Analyzer is designed to help detect a defective fuel pump is defective and can help diagnose fuelsystem related performance problems. The auto analyzer performs all standard electrical tests for oncar and bench troubleshooting. Locate faulty wiring test electrical components engine sensors ignition and fuel systems and starting or charging system voltage. Pinpoint problem area and determine which components need repair or replacement. The fuel pressure tester is compatible with all makes and models with schrader valve test port on the fuel rail all Asian European and domestic makes with banjo bolt connection the most popular 12mm x 1.25 banjo included 12mm x 1.5 and 8mm x 1.0 all makes and models with detachable rubber hose connection at fuel rail fuel line or fuel filter and GM TBI with threaded connection at fuel filter or throttle body. The fuel pump tester features a 40inch gauge hose for ease of reaching any test point 21/2 inch gauge with 0100 psi or 0700 kPa scales for accurate measurements and pressure relief button and 6feet hose for safely disposing of gasoline and repeating tests without disconnecting the gauge. The auto analyzer features backlit LCD is easy to read day or night hold button retains display data automatic polarity sensing to avoid reversed test lead hookup automatic zero adjustment for volts amps and battery tests for accurate measurements low battery indication for user convenience foldout st

Fuel Pressure Regulator Diaphragm Kit for Jeep $61.99 Gasoline;5-port return style Fuel Pressure Regulator Diaphragm Kit for Jeep

Diaphragm Kit; Fuel Pressure Regulator Diaphragm $36.99 Diaphragm Kit; Fuel Pressure Regulator Diaphragm; Gas/Alcohol; PN[4305M/4307M];

Fuel Pressure Isolator Kit for Jeep $90.99 For mechanical gauges;2-5/8 in.;0-80 psi;Includes mounting bracket;4AN fittings;Gauge not included Fuel Pressure Isolator Kit for Jeep

OTC OTC6552 Fuel Injection Import Kit $404.12 Features and Benefits: Test fuel injection systems on imports including CIS and CISE fuel systems Kit includes 0100 PSI fuel pressure gauge and 23 of the popular OTC fuel injection adapters each equipped with a quickconnect Schrader valve for safety Replacement seal kit also included Included in a molded case Weight: 4lb. 2 ozWith this new kit you can diagnose fuelrelated problems such as a weak fuel pump or restricted fuel filter and perform leakdown tests.

Mountain Radiator Pressure Test Kit. 1 Kit $212.51 Manufacturer: Mountain. 1 Kit. Features and Benefits: Use pressure pump with adapters to test radiator and cooling system Blow molded case keeps tools organized and easy to carry Customers also search for: Discount Radiator Pressure Test Kit, Buy Radia

OTC OT6550 Fuel Injection Test Kit $417.91 Test fuel injection systems on most GMs including GM TBI Ford Chrysler and Jeep vehicles. Also works on imports including CIS and CISE fuel systems. With this new kit you can diagnose fuelrelated problems such as a weak fuel pump or restricted fuel

Master Fuel Injection Tester Kit - Import And Domestic $344.95 Test fuel injection systems on most GMs, including GM TBI, Ford, Chrysler, and Jeep vehicles. Also works on imports, including CIS and CISE fuel systems. With this new kit you can diagnose fuel-related problems, such as a weak fuel pump or restricted fuel filter, and perform leak-down tests. ? Kit includes 0?100 PSI fuel pressure gauge and 35 of the popular OTC fuel injection adapters, each equipped with a quick-connect Schrader valve for safety. Replacement seal kit also includedBy OTC.

SG Tool Aid SGT33950 Fuel Injection Pressure Tester With Two Gages $128.94 Test gasoline fuel pump pressure on most domestic and imported fuel injection equipped vehicles. Easy to hook up and read. Kit contains everything to test all GM vehicles with multiport and some throttle body injection (TBI). Test all Chrysler cars with multiport turbos and some TBI. Use on most Ford TBI systems equipped with or without small Schrader test valve. Test all Ford vehicles with multiport fuel injection systems. Includes two gages for more accurate testing:. Large Gage Calibrated from 0100 PSI (07.0 BAR). Large gage can be used for all applications and has hangup hook. Small Gage Calibrated from 050 PSI (03.5 BAR). Small gage provides more detail when pressure will not exceed 50 PSI (03.5 BAR). Full instructions included. Supplied in a durable vinyl pouch for store display and tool box storage.

Diaphragm Kit; Fuel Pressure Regulator Diaphragm for Jeep $31.99 Manufactured from 6061-T6 billet aluminum housing;Prevents carburetor flooding;Quick and easy mounting Diaphragm Kit; Fuel Pressure Regulator Diaphragm for Jeep